Fiber Laser Engraving Setup: A Complete OMTech Installation Guide

Looking to elevate your engraving projects? Whether you're branding stainless steel tumblers, adding identification marks to industrial parts, or engraving custom jewelry, the OMTech fiber laser engraver is a compact yet powerful machine that delivers professional results. In this guide, you’ll learn what comes in the box, how to assemble and power up your device, and what it can do—plus useful tips to help you engrave with confidence.

What You’ll Find in the Box

Unpacking your OMTech fiber laser engraver reveals a full toolkit for getting started. Included with the unit are:

• Main machine body with pre-mounted laser arm and upright support
  
  

• U.S. standard power cable
  
  

• USB cable and flash drive containing software (EZCad) and necessary drivers
  
  

• Protective eyewear for laser use
  
  

• A set of hex keys and a measurement ruler
  
  

• Material alignment guides (position lock bars)
  
  

• A set of laser safety keys
  
  

• Remote control terminal
  
  

• Optional accessories like a rotary axis port and foot pedal
  
  

All items are designed for easy installation, minimizing setup time so you can get started quickly.

What Can You Make with a Fiber Laser?

OMTech fiber lasers are designed for high-speed, precision marking on a wide array of materials. Common uses include:

• Metal engraving: Works on stainless steel, aluminum, brass, and titanium
  
  

• Jewelry customization: Deep, permanent marks on silver and gold
  
  

• Part and tool identification: Serial numbers, barcodes, and QR codes
  
  

• Round object engraving: Use the rotary accessory for mugs and tumblers
  
  

• Plastic component labeling: Accurate markings on ABS, acrylic, and hard plastics
  
  

• Stone marking: Light etching on surfaces like marble, slate, and granite
  
  

Whether for business or creative work, these machines offer the flexibility and repeatability professionals demand.

Setup Instructions: Step-by-Step

The OMTech fiber laser engraver arrives mostly pre-assembled, but proper setup is essential to operate safely and efficiently. Here’s how to get up and running.

1. Select a Safe and Suitable Workspace

Before assembly, ensure you’re working in an appropriate environment:

• Place the unit on a level, solid surface in a temperature-controlled room (between 32°F and 104°F or 0°C–40°C)
  
  

• Keep the area dry, ventilated, and away from flammable or corrosive substances
  
  

• Avoid proximity to windows or direct sunlight
  
  

• Ensure access to a grounded, 3-prong power outlet
  
  

• Keep a fire extinguisher nearby and emergency numbers visible
  
  

2. Assemble the Components

Use the included tools to put everything in place:

• Secure the vertical support column to the table with the supplied screws
  
  

• Mount the laser arm to the bracket on the support column, centering it over the work area
  
  

• Tighten all hardware using the hex keys
  
  

• (Optional) Install the positioning bars on the work platform for consistent material alignment
  
  

3. Connect All Necessary Cables

With the physical setup complete, connect your components:

• Plug the power cord into a grounded outlet
  
  

• Connect the USB cable from the machine to your computer
  
  

• Insert the remote terminal into the correct port (or connect the cable for your protective enclosure if applicable)
  
  

• (Optional) Attach the foot pedal or rotary tool if needed
  
  

4. Ensure Proper Grounding

Since the engraver uses high-voltage systems, grounding is a critical safety step:

• Use a grounded 3-prong outlet or
  
  

• Connect the grounding cable to a metal rod installed at least 8 feet underground with resistance under 5 ohms
  
  

5. Install EZCad Software and Drivers

You’ll need to configure your computer for the laser system:

1. Plug in the USB drive included with the engraver
   
   

2. Copy all files to your computer’s hard drive before running anything
   
   

3. Install the EZCad2 software and required drivers by following the provided instructions
   
   

4. If using LightBurn software, refer to their official installation guide
   
   

5. Double-check the system parameter settings and adjust them as shown in the USB’s reference images
   
   

6. Power Up the Machine in the Correct Order

Follow this sequence to start your fiber laser engraver:

1. Remove the cap from the laser head
   
   

2. Flip the power switch to the “on” position
   
   

3. Release the emergency stop button by turning it clockwise
   
   

4. Insert and rotate the laser key clockwise to enable the main system
   
   

5. Press the Reset button
   
   

6. Press the Focus button to activate the red dot guidance system
   
   

Two red laser dots should now appear on your material surface.

7. Adjust Laser Focus

Proper focus ensures clean and accurate engraving:

• Place a sample material under the laser
  
  

• Use the adjustment knob to raise or lower the laser head
  
  

• When the two red dots converge into one, you’ve reached the optimal focal point
  
  

• Measure the height with the ruler and note it for future reference
  
  

8. Set Up Your First Engraving Job

With the machine ready, it’s time to prepare a design:

• Open EZCad2 and import a design file (bitmap or vector) or create text
  
  

• Arrange your artwork on the canvas and size it accordingly
  
  

• Configure engraving settings:
  
  

• Power: 10–75% (depending on material and desired depth)
  
  

• Speed: slower speeds result in deeper engravings
  
  

• Frequency: higher frequencies produce darker marks
  
  

• Use the red light preview (F1) to check the outline before engraving
  
  

9. Run a Test Engraving

Always test your settings on a sample first:

• Place a test piece of your material on the workbed
  
  

• Press Mark (F2) to begin the engraving process
  
  

• Review the result and adjust settings if necessary
  
  

• Once dialed in, replace the test with your final material and engrave your actual piece
  
  

10. Shut Down the System Safely

Once your job is finished:

• Exit EZCad and unplug the USB connection
  
  

• Press Focus again to deactivate the red dot pointer
  
  

• Hit the emergency stop button
  
  

• Turn the laser key counterclockwise to disable the mainboard
  
  

• Turn off the main power switch and unplug the machine if needed
  
  

• Clean the workspace and protect the lens from dust using a cover
  
  

Final Thoughts: Easy Setup, Powerful Results

The OMTech fiber laser engraver is engineered for high performance but designed with simplicity in mind. Thanks to its plug-and-play assembly and intuitive software, getting started is easier than it looks. Once up and running, you’ll enjoy fast, precise marking capabilities suitable for everything from industrial tags to fine custom jewelry.

Ready to Begin Your Laser Engraving Journey?

OMTech’s fiber laser machines combine power, efficiency, and reliability—all in a compact footprint. Whether you’re just starting a side hustle or looking to expand your business, these machines are built to grow with your ambitions. With models from 20W to 50W, safety-focused engineering, and full software support, OMTech provides the tools you need to bring your ideas to life.

Get started today with OMTech—because precision isn’t optional; it’s essential.